46
Adjusting the width of the
backrest*
Use the controls found along the sides
of the seat to adjust the width for the
backrest. This way you can set the
sides of the seat so that they conform
to your body contours.
Press the front/rear of the switch:
increase/decrease backrest width.
Head restraints
To adjust
Height: pull the head restraint up or
push it down.
Press button 1 to retract to the
lowest position.<
Adjust the angle of the front head
restraints by tilting them manually.
You can reduce the risk of spinal
injury and whiplash by adjusting
the head restraint to a height at which it
is centered roughly at ear level.<
Removal
1. Pull up the head restraint, continuing
until it is at maximum extension
Power seat adjustment*
handbook.book Page 46 Saturday, July 27, 2002 1:12 PM
To Next Page
Loading...
Need help?
General
