The tilt alarm sensor and interior motion sensor
are switched off until the vehicle is locked again.
Switching off the alarm
▷ Unlock the vehicle with the vehicle key.
▷ Unlock the vehicle with the integrated key
and activate the drive-ready state via emer‐
gency detection of the vehicle key.
Malfunction, refer to page 81.
▷ With Comfort Access: when carrying the ve‐
hicle key, grasp the driver's door or front pas‐
senger door handle completely.
Power windows
General information
The windows can be opened with the vehicle
key from the outside as well as closed with Com‐
fort Access.
With Comfort Access: The windows can be
closed from the outside via Comfort Access.
When a window is often opened in the same po‐
sition, this task can be performed by the BMW
Intelligent Personal Assistant. For instance when
the same parking garage is frequently used.
Additional information:
Vehicle key, refer to page 78.
BMW Intelligent Personal Assistant, refer to
page 52.
Safety information
Warning
When operating the windows, body parts and
objects can be jammed. There is a risk of injury
or risk of damage to property. Make sure that
the area of movement of the windows is clear
during opening and closing.
Overview
Power windows
Safety switch
Functional requirements
The windows can be operated under the follow‐
ing conditions.
▷ Standby state is switched on.
▷ Drive-ready state is switched on.
The vehicle key must be in the car's interior.
Opening
▷ Press the switch to the resistance
point.
The window opens while the switch is being
held.
▷ Press the switch beyond the resist‐
ance point.
The window opens automatically. Pressing
the switch again stops the motion.
Closing
▷ Pull the switch to the resistance
point.
The window closes while the switch is being
held.
▷ Pull the switch beyond the resist‐
ance point.
The window closes automatically if the door
is closed. Pulling again stops the motion.
Seite 100
CONTROLS
Opening and closing
100
Online Edition for Part no. 01405A111C1 - VI/20
To Next Page
Loading...
