Adjusting the height: M Sport
seat
Push switch up or down.
Adjusting distance
▷ Back: press the button and push the head re‐
straint toward the rear.
▷ Forward: pull the head restraint toward the
front.
After setting the distance, make sure that the
head restraint engages correctly.
Adjusting the distance: M Sport
seat
The distance to the back of the head is adjusted
via the backrest tilt.
Adjust the distance so that the head restraint is
as close as possible to the back of the head.
Removing
Only remove the head restraint if no one will be
sitting in the seat in question.
1.
Raise the head restraint up against the resist‐
ance.
2. Press the button, arrow 1, and pull the head
restraint out completely.
Removing: M Sport seat
The head restraints cannot be removed.
Installing
Proceed in the reverse order to install the head
restraint.
Rear head restraints
Safety information
Warning
A missing protective effect due to removed or
not correctly adjusted head restraints can
cause injuries in the head and neck area. There
is a risk of injury.
▷ Before driving, install the removed head
restraints on the occupied seats.
▷ Adjust the head restraint so its center sup‐
ports the back of the head at as close to
eye level as possible.
▷ Adjust the distance so that the head re‐
straint is as close as possible to the back
of the head. Adjust the distance via the
backrest tilt as needed.
Seite 112
CONTROLS
Seats, mirrors and steering wheel
112
Online Edition for Part no. 01405A111C1 - VI/20
To Next Page
Loading...
