Integrated key, refer to page 87.
4. Press and hold the integrated key and the
button at the same time, arrows 1, and pull
out the head restraint completely.
Removing the center head
restraint
Only remove the head restraint if no one will be
sitting in the center seat.
1.
Raise the head restraint up against the resist‐
ance.
2. Press the buttons, arrow 1, and pull the head
restraint out completely.
Installing
For mounting, insert the head restraints in the
mounts and slide down until you feel the resist‐
ance.
After the installation, make sure that the head re‐
straint engages correctly.
Exterior mirrors
General information
The mirror on the front passenger side is more
curved than the driver's side mirror.
The mirror setting is stored for the driver profile
currently in use. When a driver profile is selected,
the stored position is called up automatically.
The current exterior mirror position can be stored
using the memory function.
Safety information
Warning
Objects reflected in the mirror are closer than
they appear. The distance to the traffic behind
could be incorrectly estimated, for instance
while changing lanes. There is a risk of acci‐
dent. Estimate the distance to the traffic behind
by looking over your shoulder.
Seite 114
CONTROLS
Seats, mirrors and steering wheel
114
Online Edition for Part no. 01405A111C1 - VI/20
To Next Page
Loading...
