EasyManua.ls Logo

BMW m340i 2021 - Page 152

BMW m340i 2021
396 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Have the system immediately checked by a deal‐
er's service center or another qualified service
center or repair shop.
Additional information:
DSC Dynamic Stability Control, refer to
page 212.
DSC Dynamic Stability Control is
deactivated or DTC Dynamic
Traction Control is activated
DSC is deactivated or DTC is activated.
Additional information:
DSC Dynamic Stability Control, refer to
page 212.
DTC Dynamic Traction Control, refer to
page 214.
Flat Tire Monitor FTM
The FTM signals a loss of tire inflation
pressure in a tire.
Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneuvers.
Additional information:
Run-flat tires, refer to page 338.
Tire pressure monitor
The indicator light illuminates: the Tire
Pressure Monitor reports a low tire infla‐
tion pressure or a flat tire. Follow the in‐
formation in the Check Control message.
The indicator light flashes and is then illuminated
continuously: flat tires or tire pressure losses
cannot be detected.
Interference caused by systems or devices
with the same radio frequency: after leaving
the area of the interference, the system auto‐
matically becomes active again.
In the case of tires with special approval: the
tire pressure monitor was unable to complete
the reset. Reset the system again.
A wheel without wheel electronics is
mounted: have it checked by a dealer’s serv‐
ice center or another qualified service center
or repair shop as needed.
Malfunction: have the system checked by a
dealer’s service center or another qualified
service center or repair shop.
Additional information:
Tire pressure monitor, refer to page 331.
Steering system
Steering system may not be working.
Have the system checked by a dealer's
service center or another qualified serv‐
ice center or repair shop.
Emissions
The warning light lights up:
Emissions are deteriorating. Have the
vehicle checked as soon as possible.
The warning light flashes under certain cir‐
cumstances:
This indicates that there is excessive misfiring
in the engine.
Reduce the vehicle speed and have the sys‐
tem checked immediately; otherwise, serious
engine misfiring within a brief period can seri‐
ously damage emission control components,
in particular the catalytic converter.
Additional information:
Socket for Onboard Diagnosis, refer to
page 357.
Seite 152
CONTROLS
Displays
152
Online Edition for Part no. 01405A111C1 - VI/20

Table of Contents

Related product manuals