With the driver's safety belt fastened, briefly push
the selector lever in the desired direction, past a
resistance point, if needed. The selector lever re‐
turns to the center position in each case.
To prevent the vehicle from creeping after you
select a drive mode or reverse, maintain pressure
on the brake pedal until you are ready to start.
A selector lever lock prevents the inadvertent
shifting to selector lever position R or the inad‐
vertent shifting from selector lever position P.
Engage selector lever position R only when the
vehicle is stationary.
Releasing the selector lever lock
Press the button.
Engaging P
Engage selector lever position P only when the
vehicle is stationary.
Press button P.
Steptronic transmission, Sport
program and manual mode
Activate the Sport program/manual mode:
Press the selector lever to the left from selector
lever position D.
Manual mode:
▷ To shift down: press the selector lever for‐
ward.
▷ To shift up: pull the selector lever rearwards.
End the sport program/manual mode:
Push the selector lever to the right.
Turn signal, high beams,
headlight flasher
Turn signal
▷ On: press the lever past the resistance point.
▷ Off: press the lever past the resistance point
in the opposite direction.
▷ Triple turn signal activation: lightly tap the
lever up or down.
Seite 25
On the road
QUICK REFERENCE
25
Online Edition for Part no. 01405A111C1 - VI/20
To Next Page
Loading...
