Button Function
Seat heating, refer to page 118.
Air flow, manual.
Some of the functions can also be used via
voice, e.g., temperature.
Switching on/off
Switching on
Press any button except for the following:
▷ Switching off.
▷ Rear window defroster.
▷ Lower air flow button side.
▷ Seat heating.
Switching off
Complete system:
Press the button until the control panel
switches off.
Temperature
Concept
The automatic climate control achieves the set
temperature as quickly as possible, if needed, by
using the maximum cooling or heating capacity,
and then keeps it constant.
Adjusting
Using the button:
Press the upper or lower button side to
set the desired temperature.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver"
6. "Temperature:"
7. Set the desired temperature.
Do not rapidly switch between different tempera‐
ture settings. Otherwise, the automatic climate
control will not have sufficient time to adjust the
set temperature.
Air conditioning
Concept
The air in the car's interior will be cooled and de‐
humidified and, depending on the temperature
setting, warmed again.
The car's interior can only be cooled with the
drive-ready state switched on.
Switching on/off
Press the button.
Depending on the weather, the windshield and
the side windows may fog up briefly when drive-
ready state is switched on.
Air conditioning is switched on automatically with
the AUTO program.
When using the automatic climate control, con‐
densation water develops and collects under‐
neath the vehicle.
Maximum cooling
Concept
The system is set to the lowest temperature, op‐
timum air flow and recirculated-air mode with the
drive-ready state switched on.
General information
The function is available with external tempera‐
tures above approx. 32 ℉/0 ℃ and with the
drive-ready state switched on.
Seite 268
CONTROLS
Climate control
268
Online Edition for Part no. 01405A111C1 - VI/20
To Next Page
Loading...
