General information
To adjust the air flow manually switch off AUTO
program first.
Adjusting
Press the lower or upper side of the
button: decrease or increase air flow.
The selected air flow is shown on the climate
control display.
The air flow may be reduced automatically to
save battery power.
Manual air distribution
Concept
The air distribution for climate control can be ad‐
justed manually.
Adjusting
Press the button repeatedly to select a
program:
▷ Windows, upper body region, and floor area.
▷ Upper body region and floor area.
▷ Floor area.
▷ Windows and floor area.
▷ Windows.
▷ Windows and upper body.
▷ Upper body region.
The selected air distribution is shown on the cli‐
mate control display.
Defrosting windshield and
remove condensation
Concept
Ice and condensation are quickly removed from
the windshield and the front side windows.
Switching on/off
Press the button.
The LED is illuminated with the system
switched on.
The air flow can be adjusted manually with the
system switched on.
If there is any window condensation,
press the button or switch on the air
conditioning. Make sure that air can flow to the
windshield.
Rear window defroster
Press the button. The LED lights up.
The function is operational when the
drive-ready state is switched on.
The rear window defroster switches off automat‐
ically after a certain period of time.
Microfilter
The microfilter removes dust and pollen from the
incoming air.
Have this filter changed during vehicle mainte‐
nance.
Automatic climate control
with enhanced features
Overview
Buttons in the vehicle
Seite 270
CONTROLS
Climate control
270
Online Edition for Part no. 01405A111C1 - VI/20
To Next Page
Loading...
