EasyManua.ls Logo

BMW m340i 2021 - Page 272

BMW m340i 2021
396 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. Set the desired temperature.
8. "OK"
Do not rapidly switch between different tempera‐
ture settings. Otherwise, the automatic climate
control will not have sufficient time to adjust the
set temperature.
Temperature of the ventilation
General information
The temperature of the ventilation in the upper
body region can be adjusted.
The temperature is individually adjusted, e.g.
colder toward blue, warmer toward red.
The air flow of the ventilation in the upper body
region heats or cools noticeably, depending on
the adjusted temperature.
This does not change the set interior tempera‐
ture for the driver and front passenger.
Adjusting
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Temperature adjustment"
6. Set the desired temperature.
Air conditioning
Concept
The air in the car's interior will be cooled and de‐
humidified and, depending on the temperature
setting, warmed again.
The car's interior can only be cooled with the
drive-ready state switched on.
Switching on/off
Using the button:
Press the button.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "A/C"
Depending on the weather, the windshield and
the side windows may fog up briefly when drive-
ready state is switched on.
Air conditioning is switched on automatically with
the AUTO program.
When using the automatic climate control, con‐
densation water develops and collects under‐
neath the vehicle.
Maximum cooling
Concept
The system is set to the lowest temperature, op‐
timum air flow and recirculated-air mode with the
drive-ready state switched on.
General information
The function is available with external tempera‐
tures above approx. 32 ℉/0 ℃ and with the
drive-ready state switched on.
Switching on/off
Press the button.
The LED is illuminated when the sys‐
tem is switched on.
Air flows out of the vents to the upper body re‐
gion. The vents need to be open for this.
The air flow can be adjusted with the program
active.
AUTO program
Concept
The AUTO program cools, ventilates or heats
the car's interior automatically.
Seite 272
CONTROLS
Climate control
272
Online Edition for Part no. 01405A111C1 - VI/20

Table of Contents

Related product manuals