BMW m340i 2021 - Page 97

Guest profile
In the guest profile, the valet parking mode can
only be deactivated if the valet parking mode was
activated in the guest profile.
1. Select guest profile.
2. Enter the PIN that was specified during acti‐
vation.
If the PIN has been forgotten, the valet parking
mode must be deactivated via a personal driver
profile.
Adjusting
General information
Depending on the vehicle equipment and coun‐
try version, various settings for opening and clos‐
ing are possible.
These settings are stored for the driver profile
currently used.
Unlocking and locking
Doors
1.
"CAR"
2. "Settings"
3. "Key button settings"
4. Select the symbol.
5. Select the desired setting:
▷ "Driver's door only"
Only the driver's door and the fuel filler
flap are unlocked. Pressing again unlocks
the entire vehicle.
▷ "All doors"
The entire vehicle is unlocked.
Confirmation signals from the
vehicle
1.
"CAR"
2. "Settings"
3. "Doors/Access"
4. Deactivate or activate the desired confirma‐
tion signals:
▷ "Flash when locking/unlocking"
Unlocking is signaled by two flashes, lock‐
ing by one.
▷ With alarm system:
"Sound when locking/unlocking"
Unlocking is confirmed with two sound
signals, locking is confirmed with one
sound signal.
Folding mirrors in automatically
1.
"CAR"
2. "Settings"
3. "Doors/Access"
4. "Fold mirrors in when locked"
Automatic unlocking
1.
"CAR"
2. "Settings"
3. "Doors/Access"
4. "Unlock at end of trip"
After drive-ready state is switched off by
pressing the Start/Stop button, the locked ve‐
hicle is automatically unlocked.
Automatic locking
1.
"CAR"
2. "Settings"
3. "Doors/Access"
4. Select the desired setting:
▷ "Lock automatically"
The vehicle locks automatically after a
while if no door is opened after unlocking.
▷ "Lock after starting to drive"
The vehicle locks automatically after you
drive off.
Seite 97
Opening and closing
CONTROLS
97
Online Edition for Part no. 01405A111C1 - VI/20