Technical data
Vehicle features and
options
This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features and functions that are
not necessarily available in your vehicle, e.g., due
to the selected options or country versions. This
also applies to safety-related functions and sys‐
tems. When using these functions and systems,
the applicable laws and regulations must be ob‐
served.
General information
The technical data and specifications in the
Owner's Manual are used as guidance values.
The vehicle-specific data can deviate from this,
for instance due to the selected special equip‐
ment, country version or country-specific meas‐
urement method. Detailed values can be found in
the approval documents, on labels on the vehicle
or can be obtained from a dealer’s service center
or another qualified service center or repair shop.
Dimensions
The dimensions can vary depending on the
model version, equipment or country-specific
measurement method.
The specified heights do not take into account
attached parts, for instance a roof antenna, roof
racks or spoiler. The heights can deviate, for in‐
stance due to the selected special equipment,
tires, load and chassis version.
BMW M3 Sedan
Width with mirrors in/mm 81.4/2,068
Width without mirrors in/mm 74.3/1,887
Height in/mm 56.4/1,433
Length in/mm 189.1/4,804
Wheelbase in/mm 112.5/2,857
Smallest turning radius diam. ft/m 40.0/12.2
Seite 370
REFERENCE
Technical data
370
Online Edition for Part no. 01405A1E4B0 - X/20
To Next Page
Loading...
Need help?
General
