Secure flywheel with transmission screw (1) and special tools 11 9 260 and 11 9 265. Release flywheel screws
with special tool 11 4 180.
Fig. 124: Releasing Flywheel Screws
Courtesy of BMW OF NORTH AMERICA, INC.
Tightening torque: 11 22 1AZ. Refer to ENGINE - TIGHTENING TORQUES .
Check dowel sleeves for damage and firm seating.
Assemble engine.
11 22 513 REPLACING ROLLER BEARING FOR DUAL-MASS FLYWHEEL
Special tools required:
21 2 051
21 2 052
Using hydraulic press (1) and special tool 21 2 051, press out dual
mass flywheel downwards on engine side.
NOTE: Flywheel removed!
2006 BMW X5 30i
2004-2006 ENGINE Engine Mechanical - Repair Instructions - X3 & X5 (M54)
sábado, 2 de octubre de 2021 11:25:52 p. m. Page 129 © 2011 Mitchell Repair Information Company, LLC.
To Next Page
