BMW M54 - CONNECTING ROD WITH BEARINGS; REPLACING ALL CONNECTING ROD BEARINGS (M52; S52; M52 TU; M54; M56)

Fig. 140: Tightening Down Central Screw
Courtesy of BMW OF NORTH AMERICA, INC.
Tighten down central screw (1).
Tightening torque, 11 23 2AZ. Refer to ENGINE - TIGHTENING TORQUES .
CONNECTING ROD WITH BEARINGS
11 24 571 REPLACING ALL CONNECTING ROD BEARINGS (M52 / S52 / M52TU / M54 / M56)
Special tools required:
 00 2 590
 00 9 120
 11 2 110
(piston removed)
Install new conrod bearing shells.
Insert one blue (1) and one red (2) bearing shell (irrespective of the color coding on the conrod shaft).
IMPORTANT: Note grinding stages on crankshaft. Refer to ENGINE - TECHNICAL DATA .
2006 BMW X5 30i
2004-2006 ENGINE Engine Mechanical - Repair Instructions - X3 & X5 (M54)
sábado, 2 de octubre de 2021 11:25:52 p. m. Page 146 © 2011 Mitchell Repair Information Company, LLC.