Fig. 31: Releasing Cylinder Head Bolts
Courtesy of BMW OF NORTH AMERICA, INC.
Lift off cylinder head.
Installation
Installation of cylinder head is described separately from removal.
Clean sealing faces of cylinder head and engine block; if necessary, remove traces of gasket with hardwood
spatula. Make sure no gasket remnants drop into oil and cooling channels.
Check adapter sleeves for damage and correct installation position.
2006 BMW X5 30i
2004-2006 ENGINE Engine Mechanical - Repair Instructions - X3 & X5 (M54)
sábado, 2 de octubre de 2021 11:25:50 p. m. Page 35 © 2011 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
