BMW M54 - OIL FILTER AND LINES; REMOVING AND INSTALLING COMPLETE FULL-FLOW OIL FILTER (M52; S52; M52 TU; M54; M56)

Fig. 369: Identifying Control Plunger Components
Courtesy of BMW OF NORTH AMERICA, INC.
OIL FILTER AND LINES
11 42 020 REMOVING AND INSTALLING COMPLETE FULL-FLOW OIL FILTER (M52 / S52 /
M52TU / M54 / M56)
Remove intake air housing with air-mass flow sensor.
Unfasten oil filter cover to allow oil to flow out of main flow oil filter housing and back into oil pan.
This operation is described in the section BMW engine oil service. Refer to 00 00 250 BMW ENGINE OIL
SERVICE INCL. SUPPLEMENTARY SERVICE (M54 / M56).
Remove alternator. Refer to 12 31 020 REMOVING AND INSTALLING OR REPLACING
ALTERNATOR (M54) .
2006 BMW X5 30i
2004-2006 ENGINE Engine Mechanical - Repair Instructions - X3 & X5 (M54)
sábado, 2 de octubre de 2021 11:25:57 p. m. Page 379 © 2011 Mitchell Repair Information Company, LLC.