BMW R 1200GS Rallye 2017 User Manual

General instructions
The "Maintenance" chapter de-
scribes straightforward proced-
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your vehicle are listed in
the section entitled "Technical
data".
Further information on mainten-
ance and repair work is available
from your BMW Motorrad author-
ised dealer in the form of a DVD.
Some of the work requires spe-
cial tools and a thorough know-
ledge of the technology involved.
If you are in doubt, consult a
specialist workshop, preferably
your authorised BMW Motorrad
dealer.
Service toolkit
with service tool kit
OA
BMW Motorrad has assembled
a service toolkit that is ideal for
carrying out extended service
work (e.g. removing and installing
wheels) on this motorcycle. You
can obtain the tools set from
your authorised BMW Motorrad
dealer.
Rear-wheel stand
Installing the rear-wheel
stand
Place the motorcycle on its
stand on firm, even ground.
Use the rear-wheel stand with
rear axle adapter. The rear-
wheel stand and its accessor-
ies are available from your au-
thorised BMW Motorrad Re-
tailer.
Use screws 1 to set the rear-
wheel stand to the desired
height.
6
30
z Maintenance

BMW R 1200GS Rallye 2017 Specifications

General

Displacement	1170 cc
Bore x Stroke	101 mm x 73 mm
Max Torque	125 Nm at 6, 500 rpm
Transmission	6-speed
Curb Weight	244 kg
Final Drive	Shaft drive
Front Tire	120/70 R19
Rear Tire	170/60 R17
Wheelbase	1, 507 mm
Compression Ratio	12.5:1
Fuel System	Electronic fuel injection
Max Power	125 hp at 7, 750 rpm
Fuel Capacity	20 liters
Front Suspension	Telelever, central spring strut
Rear Suspension	BMW Motorrad Paralever
Front Brakes	Dual disc, floating brake discs, diameter 305 mm, 4-piston radial calipers
Rear Brakes	Single 276 mm disc, 2-piston caliper
ABS	BMW Motorrad ABS
Frame	Two-section frame, front- and bolted on rear frame
Length	2, 210 mm
Height	1, 450 mm
Clutch	Wet clutch, hydraulically operated
Engine Type	Air/liquid-cooled four stroke flat twin engine, double overhead camshaft, one balance shaft