If no further changes are made
the selected heating level is
adopted as the setting.
To switch off heated grips,
press button 1 until heated grip
symbol 2 is no longer shown in
the display.
Mirrors
Adjust mirrors
Move mirror into desired posi-
tion by twisting.
Adjust mirror arm
Slide up protective cap over
threaded fastener on mirror
arm.
Loosen nut 1 with tool from
onboard tool kit.
Turn mirror arm into desired
position.
Tighten the nut 1 while holding
the mirror arm in place.
Mirror (locknut) on
adapter
16 lb/ft (22 Nm)
Slide protective cap over
threaded fastener.
Spring preload
Setting
It is essential to set the spring
preload to suit the load carried by
the motorcycle. Increase spring
preload when the vehicle is heav-
ily loaded and reduce spring
preload accordingly when the
vehicle is lightly loaded.
Adjust spring preload at
rear wheel
Make sure ground is level and
firm and park motorcycle.
4
38
z
Operation
ProCarManuals.com
To Next Page
Loading...
Need help?
General
