Replacing a bulb
1. Open the hood, refer to page 318.
2. Unscrew the lid counterclockwise and re‐
move it.
3. Pull the bulb holder out past the spring resist‐
ance point.
4. Pull off the bulb.
5. Insert the new bulb and attach the cover in
the reverse order.
Make sure that the connector is correctly
seated.
LED headlights with enhanced
features
General information
Follow the safety information, refer to page 329.
All front lights are designed with LED technol‐
ogy, with the exception of the two turn signals.
In the case of a malfunction, contact a dealer's
service center or another qualified service center
or repair shop.
Overview
1 Cornering light
2 Daytime running lights/parking lights
3 Low beams/high beams
4 Turn signal
Turn signal, bulb replacement
General information
Follow the safety information, refer to page 329.
24-watt bulb, PY24W
Seite 331
Replacing components
MOBILITY
331
Online Edition for Part no. 01405A1F693 - X/20
To Next Page
Loading...
