BMW X3 - Page 332

Replacing a bulb
1. In the wheel house, press the two retainer
tabs and fold down the cover.
2. Unscrew and remove the bulb holder.
3. Press the bulb gently into the bulb holder,
turn counterclockwise and remove it.
4. Insert the new bulb.
5. Mount the bulb holder.
6. Mount the lid.
Adaptive LED headlights
Follow the safety information, refer to page 329.
All lights feature LED technology.
In the case of a malfunction, contact a dealer's
service center or another qualified service center
or repair shop.
LED front fog lights
Follow the safety information, refer to page 329.
LED front fog lights are made using LED tech‐
nology.
In the case of a malfunction, contact a dealer's
service center or another qualified service center
or repair shop.
Tail lights
General information
Follow the safety information, refer to page 329.
With LED headlights or LED headlights with en‐
hanced features: the rear light features LED
technology.
With Adaptive LED headlights: all tail lights fea‐
ture LED technology.
In the case of a malfunction, contact a dealer's
service center or another qualified service center
or repair shop.
Overview
1 Brake light
2 Turn signal
3 Tail lights
4 Reversing lights
5 Lower brake lights
Exterior tail lights, bulb replacement
General information
Follow the safety information, refer to page 329.
Brake lights, turn signal: 21-watt bulb, P21W.
Lower brake lights: 21 W bulb, H21W.
Seite 332
MOBILITY
Replacing components
332
Online Edition for Part no. 01405A1F693 - X/20