Hot surfaces.Hot surfaces.
Risk of burning!Risk of burning!
Perform all work only on components that have cooled down.
Main WorksMain Works
Remove air filter insertRemove air filter insert
PreconditionPrecondition
Ignition is switched off.
Damage to the clean air line. Damage to the air filter.Damage to the clean air line. Damage to the air filter.
For changing the air filter insert, if the upper section of intake filterFor changing the air filter insert, if the upper section of intake filter
housing is only raised and not completely removed, the clean air linehousing is only raised and not completely removed, the clean air line
and the air filter insert may be damaged.and the air filter insert may be damaged.
Do not lift upper section of intake filter housing by force.
Unfasten clamp.
Remove upper section of intake filter housing completely.
BMW Group - AIR: 2022-08-08 / 12:45
Model: X5 sDrive40i
Development code: G05
Model code: CR43
Lead type: CR43
To Next Page
Need help?
General
