Filling the tire with sealing
compound
Safety information
DANGER
If the exhaust pipe is blocked or ventilation is in‐
sufficient, harmful exhaust gases can enter into
the vehicle. The exhaust gases contain pollu‐
tants which are colorless and odorless. In en‐
closed areas, exhaust gases can also accumu‐
late outside of the vehicle. There is danger to
life. Keep the exhaust pipe free and ensure suf‐
ficient ventilation.
NOTICE
The compressor can overheat during extended
operation. There is a risk of damage to prop‐
erty, among other potential damage. Do not run
the compressor for more than 10 minutes.
Filling
1.
Shake the sealant bottle.
2. Pull filler hose completely out of the cover of
the sealant bottle. Do not kink the hose.
3. Slide the sealant bottle into the holder on the
compressor housing, ensuring that it en‐
gages audibly.
4. Screw the filler hose of the sealant bottle
onto the tire valve of the nonworking wheel.
Seite 362
MOBILITY
Wheels and tires
362
Online Edition for Part no. 01405A37D22 - VI/21
To Next Page
Loading...
