BMW X7 - Page 281

Displaying activation points
1.
Press the button.
2. Tilt the Controller to the right.
3. "Manage points"
A list of all activation points is displayed.
Renaming or deleting activation
points
1.
Press the button.
2. Tilt the Controller to the right.
3. "Manage points"
A list of all activation points is displayed.
4. Select an activation point as needed.
5. Select the desired setting.
Functional limitations
The Surround View functional limitations apply.
Additional information:
Surround View, refer to page 274.
System limits
The limits of the Surround View system apply.
Additional information:
Surround View, refer to page 274.
With Parking Assistant
Plus: Remote 3D View
Principle
The BMW app and the pictures of the Surround
View cameras in combination with the corre‐
sponding equipment enable the display of the
vehicle’s surroundings on a mobile device.
The function displays a momentary view of the
situation.
Sensors
The system is controlled by the following sen‐
sors:
▷ Front camera.
▷ Top view cameras.
▷ Rearview camera.
Additional information:
Sensors of the vehicle, refer to page 37.
Functional requirements
▷ Data transmission must be activated.
Data protection, refer to page 68.
▷ BMW app must be installed on the mobile
device.
▷ ConnectedDrive countries: a driver profile
with an existing ConnectedDrive account
must be activated.
Driver profiles, refer to page 69.
Switching the function on/off
Switching on/off with other
functions
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Data privacy"
5. Select the desired setting.
Switching on/off individually
Pre-adjustment
1.
"CAR"
2. "Settings"
3. "General settings"
4. "Data privacy"
5. "Select services individually"
6. "My BMW app & customer portal"
7. "Remote 3D View"
Seite 281
Driver assistance systems
CONTROLS
281
Online Edition for Part no. 01405A385B6 - VI/21