Switching climate control
functions on/off
Functional requirements
The rear automatic climate control is operational
when the drive-ready state is switched on.
The rear automatic climate control is not ready
for operation if the automatic climate control is
switched off or if the function for defrosting the
windows and removing condensation is active.
Via iDrive
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Third row of seats"
6. "Activate heating/cooling"
Using the button: switching on
Press any button except the following:
Switching off.
Using the button: switching off
Press the button.
Temperature
Principle
The automatic climate control achieves the set
temperature as quickly as possible, if needed, by
using the maximum cooling or heating capacity,
and then keeps it constant.
Setting the temperature
Using the button:
Press the upper or lower button side to
set the desired temperature.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Third row of seats"
6. Set the desired temperature.
The selected temperature is shown on the cli‐
mate control display.
Do not rapidly switch between different tempera‐
ture settings. Otherwise, the automatic climate
control will not have sufficient time to adjust the
set temperature.
Air conditioning
Principle
The air in the car's interior will be cooled and de‐
humidified and, depending on the temperature
setting, warmed again.
The car's interior can only be cooled with the
drive-ready state switched on.
Turning on/off
Press the button.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "A/C"
Air conditioning is switched on with the engine
running.
Depending on the weather, the windshield and
side windows may fog up briefly when drive-
ready state is switched on.
Air conditioning is switched on automatically with
the AUTO program.
Seite 302
CONTROLS
Climate control
302
Online Edition for Part no. 01405A385B6 - VI/21
To Next Page
Loading...
