EasyManua.ls Logo

BMW XM - Page 131

BMW XM
416 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using the parking brake via iDrive
The parking brake can also be engaged or dis-
engaged via iDrive. Additionally, further infor-
mation is displayed.
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Drivetrain and chassis"
5. "Parking brake"
6. Select the desired setting.
Malfunction
If the parking brake fails or malfunctions, se-
cure the vehicle so that it does not roll away
before you exit.
A Check Control message is displayed.
Secure the vehicle against rolling away, for in-
stance with a wheel chock, after getting out of
the vehicle.
After a power interruption
To reestablish parking brake operability after
a power interruption, an initialization may be
required.
1.
Turn on standby state.
2. Pull the switch while stepping on the
brake pedal or selector lever position P is
set and then push.
This process may take a few seconds. Some
mechanical sounds associated with this proc-
ess are normal.
The indicator light is no longer illumi-
nated as soon as the parking brake is
ready for operation again.
Automatic Hold
Principle
Automatic Hold assists the driver by automati-
cally setting and releasing the brake such as
when moving in stop-and-go traffic.
The vehicle is automatically held in place when
it is stationary.
On uphill grades the system prevents the vehi-
cle from rolling back when driving off.
General information
The parking brake is automatically engaged
under the following conditions:
Drive-ready state is switched off.
The driver’s door is open for more than one
second and no pedal is pressed during this
time.
The moving vehicle is brought to a stand-
still using the parking brake.
Safety information
Warning
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of accident.
Before leaving the vehicle, secure the vehicle
against rolling away.
In order to ensure that the vehicle is secured
against rolling away, follow the following:
Set the parking brake.
On uphill grades or on downhill slopes,
turn the front wheels in the direction of
the curb.
On uphill grades or on downhill slopes,
also secure the vehicle, for instance with
a wheel chock.
Seite 131
Driving
CONTROLS
131
Online Edition for Part no. 01405A8A608 - VI/23

Related product manuals