EasyManua.ls Logo

BMW XM - Page 177

BMW XM
416 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Warning
Individual functions may not work correctly
when towing with Forward Collision Mitiga-
tion enabled or Cruise Control switched on.
There is a risk of accident. Switch off Forward
Collision Mitigation and Cruise Control before
towing.
Sensors
Depending on the equipment, the system is
controlled by the following sensors:
Camera behind the windshield.
Front radar sensor.
Radar sensors, side, front.
Additional information:
Sensors of the vehicle, refer to page 37.
Speed range
The system issues a warning of a possi-
ble risk of collision at speeds above approx.
3 mph/5 km/h.
If the vehicle speed exceeds approx.
155 mph/250 km/h, the system is deactivated
temporarily.
Some functions are deactivated earlier.
The system is enabled as soon as the speed
drops below these values again.
Turning the Forward Collision
Mitigation on/off
Turning on the system automatically
Depending on the national-market version, the
system is automatically active after every de-
parture.
Turning on system manually
The system is activated by setting the warning
time.
Additional information:
Setting the warning time, refer to page
177.
Turning system off manually
Depending on national-market version, the ad-
justment can only be made when the vehicle is
at a standstill or in a very low speed range.
If necessary, the switch-off must be confirmed
successively on the control display.
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Forward Collision Mitigation"
7. "Off"
Setting the warning time
1.
Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Forward Collision Mitigation"
7. Select the desired setting.
The more sensitive the warning time is set to
be, the more warnings will be displayed. The
system can therefore also issue more early or
unfounded warnings and reactions.
The system checks for visual impairments. De-
pending on the vehicle equipment, the Driver
Attention Camera in the instrument cluster
captures the driver’s field of vision. Visibility
and field of vision also affect the timing of the
warnings.
Display in the instrument cluster
The following indicator/warning lights are
shown on the instrument cluster and, depend-
ing on vehicle equipment, on the Head-up dis-
play:
Seite 177
Safety
CONTROLS
177
Online Edition for Part no. 01405A8A608 - VI/23

Related product manuals