Activating/deactivating Dynamic
Stability Control
General information
Dynamic Stability Control is automatically acti-
vated whenever drive-ready state is switched
on.
If Dynamic Stability Control is deactivated, driv-
ing stability is limited when accelerating and
cornering.
To support driving stability, reactivate Dynamic
Stability Control as soon as possible.
Activating/deactivating the system
1.
Press the button to open the menu.
2. "DSC OFF"
Dynamic Stability Control is deactivated.
3. Press the button again to reactivate
Dynamic Stability Control.
After deactivating Dynamic Stability Control,
the program for M xDrive can be selected di-
rectly.
Dynamic Stability Control settings can be con-
figured in M Setup.
Additional information:
M Setup, refer to page 209.
Displays in the instrument cluster
View when Dynamic Stability
Control is deactivated.
Indicator light illuminates: Dynamic
Stability Control is deactivated.
Warning light flashes: Dynamic Stabil-
ity Control is regulating the driving and
brake power. The vehicle is stabilized.
Reduce speed and modify your driving style to
the driving circumstances.
Warning light illuminates: Dynamic Sta-
bility Control has failed or is initializing.
Driving stabilization is restricted or has
failed.
If the warning light illuminates continuously,
have the vehicle checked immediately by an
authorized service center or another qualified
service center or repair shop.
Automatic program change
Dynamic Stability Control can be activated au-
tomatically by Forward Collision Mitigation de-
pending on the situation. Deactivate Forward
Collision Mitigation as necessary.
Additional information:
Forward Collision Mitigation with brake inter-
vention, refer to page 176.
M Dynamic Mode
Principle
M Dynamic Mode allows a ride with high longi-
tudinal and lateral acceleration but with limited
driving stability.
Only in the absolute limit range does the sys-
tem intervene for stabilization by reducing the
engine power and by brake interventions on
the wheels. In this driving condition, additional
steering corrections may be necessary.
General information
Depending on vehicle equipment, the active
M xDrive mode is: "4WD SPORT" when M Dy-
namic Mode is activated.
You may find it useful to briefly activate the
system under the following special circumstan-
ces:
Seite 215
Driving stability control systems
CONTROLS
215
Online Edition for Part no. 01405A8A608 - VI/23
To Next Page
Loading...
