EasyManua.ls Logo

BMW XM - Page 246

BMW XM
416 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Displays in the instrument cluster
Depending on the equipment and national-
market version, information for the system is
displayed in the Assisted View in the central
display area of the instrument cluster.
Additional information:
Assisted View, refer to page 154.
System limits
Depending on the national-market version or
country in which the vehicle is currently being
driven, the function may not be available.
The system does not react or reacts to a lim-
ited extent to the route ahead in the following
situations:
If the vehicle location cannot be clearly de-
termined by the navigation system.
On wintry roads.
Additionally, the limits for Cruise Control, Dis-
tance Control, Assisted Driving, and Speed
Limit Assist systems apply.
Additional information:
Cruise control, refer to page 226.
Distance control, refer to page 228.
Assisted Driving Mode, refer to page 234.
Speed Limit Assistant, refer to page 243.
Lane change with active
guidance
Principle
Lane change with active guidance assists the
driver when lane changes are necessary to
reach a destination. A notice is also displayed
on the instrument cluster. In addition, a slight
jerk can be felt on the steering wheel.
General information
The system uses the Assisted Driving Mode
sensors.
Safety information
Warning
The system cannot serve as a substitute for
the driver’s personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react
to all traffic situations. There is a risk of
accident. Adjust driving style to traffic condi-
tions. Watch the surrounding traffic situation
closely, be ready to take over steering and
braking at any time, and actively intervene
where appropriate.
The Cruise Control, Distance Control, and As-
sisted Driving alerts also apply.
Additional information:
Cruise control, refer to page 226.
Distance control, refer to page 228.
Assisted Driving Mode, refer to page 234.
Functional requirements
Cruise Control and Distance Control are ac-
tivated.
Driving on a highway or highway-like road.
A situation-dependent minimum speed has
been reached.
The system detects a sufficiently large gap
in traffic in the adjacent lane.
A crossable lane boundary on the side of
the desired lane change is detected.
Destination guidance is active on the navi-
gation system.
The function is not available when using
navigation software via Apple CarPlay or
Android Auto.
The function must be available in the coun-
try in which the vehicle is driven.
Seite 246
CONTROLS
Driver assistance systems
246
Online Edition for Part no. 01405A8A608 - VI/23