BMW Z4 - Page 144

Switching on/off
Via iDrive:
1. "CAR"
2. "Settings"
3. "Displays"
4. "Head-up display"
5. "Head-up display"
Display
Overview
The following information is displayed on the
Head-up Display:
▷ Vehicle speed.
▷ Navigation instructions.
▷ Check Control messages.
▷ Selection list in the instrument cluster.
▷ Driver assistance systems.
▷ Sport displays.
Some of this information is only displayed briefly
as needed.
Selecting displays in the Head-up
Display
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Displays"
4. "Head-up display"
5. Select the desired setting.
The setting is stored for the driver profile cur‐
rently used.
Setting the brightness
The brightness is automatically adjusted to the
ambient brightness.
The basic setting can be adjusted manually.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Displays"
4. "Head-up display"
5. "Brightness"
6. Turn the Controller until the desired bright‐
ness is set.
7. Press the Controller.
When the low beams are switched on, the
brightness of the Head-up Display can be addi‐
tionally influenced using the instrument lighting.
Adjusting the height
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Displays"
4. "Head-up display"
5. "Height"
6. Turn the Controller until the desired height is
reached.
7. Press the Controller.
The setting is stored for the driver profile cur‐
rently used.
The height of the Head-up Display can also be
stored using the memory function, refer to
page 107.
Setting the rotation
The Head-up Display view can be rotated.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Displays"
4. "Head-up display"
5. "Rotation"
Seite 144
CONTROLS
Displays
144
Online Edition for Part no. 01402779113 - II/19