BN-Link BNC-60/154R - User Manual

OUTDOOR REMOTE
CONTROL OUTLET 2-Pack
MODEL: BNC-60/154R
_________________________________________
TECHNICAL SPECIFICATIONS:
Voltage: 125VAC, 60Hz
Resistive: 15A 1875W
Tungsten: 10A 1250W
Transmission frequency: 433.92MHz
Remote battery: 12V 23A
PACKAGE CONTENTS:
(2) OUTDOOR OUTLET RECEIVERS (“Receiver”) –
Figure 1
(2) REMOTE CONTROLS (“Remote”) – Figure 2
(2) BATTERY TYPE: 12V 23A
BATTERY INSTALLATION/REPLACEMENT:
 Battery Installation/replacement:
o Remove the two 12V 23A batteries
from the bags.
o Open the battery compartment on
each Remote located on the back of
the Remote (Figure 3). The battery
compartment can be opened by
pushing the top of the battery door
down and sliding if off the Remote.
o Replace the battery compartment door
by sliding it towards the top of the
Remote control.
o Test for proper function by pressing
the ON button. A red light should
briefly illuminate at the top of the
Remote when the ON button is
pressed (Figure 4).
FEATURES:
 Outdoor Receivers are IPX4 water resistant
when hung above the ground facing
downwards. Do not submerge the outlets or
operate near standing water.
 The Remotes can control the Receivers up to
100 feet away in line-of-sight
 In the event of a power outage, the Receiver
will remain in the OFF setting until the power
button on the Receiver is powered ON or the
Remote is used to power the Receiver ON.
 Power output up to 1,875W at AC125V (60Hz)
DO NOT EXCEED A TOTAL OF 1,875W PER
RECEIVER
SETUP/OPERATION:
 After installing the 12V 23A batteries in each of
the Remotes, plug the Receivers into the
desired grounded wall outlets.
 Receivers can be controlled using the included
Remotes to turn ON/OFF or by using the
manual power button located on the top of each
Receiver.
 A red light will appear above the power button
on the Receiver when the Receiver is powered
ON.
PUSH DOWN
SLIDE DOOR
OFF REMOTE
Figure 1
(Receivers)
Figure 2
(Remotes)
Figure 3
LED In
dicator Light
Figure 4

Summary

Technical Specifications and Package Contents

Technical Specifications

Details voltage, resistive/tungsten load, frequency, and remote battery type for the outdoor remote control outlet.

Package Contents

Lists the items included in the 2-pack, such as outdoor receivers, remote controls, and battery type.

Remote Battery Installation and Features

Battery Installation and Replacement

Step-by-step guide to opening the remote, replacing batteries, and testing functionality.

Product Features

Highlights IPX4 water resistance, remote range, power outage behavior, and maximum power output.

Setup, Operation, and Safety Warnings

Setup and Operation

Instructions for plugging in receivers, controlling them via remote or manual button, and indicator light behavior.

General Safety Warnings

Crucial safety advice including battery handling, remote water resistance, outlet usage, and power limitations.

FCC Statement and Compliance

Details FCC compliance, potential interference, and user recommendations for resolving interference issues.

Programming, Troubleshooting, and Warranty

Programming the Outlets

Procedure to pair receivers with a remote for customized control of multiple outlets.

Resetting an Outlet

Steps to unpair a receiver or reset it if it becomes unresponsive to the remote control.

Troubleshooting Common Issues

Guidance for resolving problems like receivers not responding to the remote control.

Warranty Information

Details the 1-year limited warranty, coverage, proof of purchase requirements, and contact information.

BN-Link BNC-60/154R Specifications

General

Brand	BN-Link
Model	BNC-60/154R
Category	Remote Control
Language	English