To Next PageTo Next Page
Need help?Do you have a question about the BOB Weather Shield and is the answer not in the manual?
Product for specific stroller only; avoid suffocation risk; ensure unobstructed vents; check temperature limits.
Engage stroller parking brake and position both sun canopies to receive the weather shield.
Pull canopy drawstrings to gather material and cinch cord locks to secure.
Fold rear canopy flap forward and attach velcro to the corresponding mate on the canopy.
Inspect and ensure air passages at the back of the stroller and canopy are unobstructed.
Drape rear flap over the stroller back and align seam above window with forward canopy supports.
Stretch elastic cords on each side under respective black shock knobs for attachment.
Enlarge or reduce cord loops around shock knobs to adjust tension for a secure fit.
Hook front elastic edge under the plastic nose lip, aligning the front air vent.
Stretch and route the side elastic edges under each respective side of the stroller frame.
Ensure rear flap vents align with air passages between seat back and canopy, keeping openings clear.
Lift and roll shield over the forward edge of the canopy for child loading/unloading.
Release shield, re-secure under stroller nose lip and frame sides after children are safely harnessed.
Hand wash with cold water and hang dry. Do not dry clean, iron, or use a dryer.
One-year warranty against defects; valid for original purchaser with proof of purchase.
Product for specific stroller only; avoid suffocation risk; ensure unobstructed vents; check temperature limits.
Engage stroller parking brake and position both sun canopies to receive the weather shield.
Pull canopy drawstrings to gather material and cinch cord locks to secure.
Fold rear canopy flap forward and attach velcro to the corresponding mate on the canopy.
Inspect and ensure air passages at the back of the stroller and canopy are unobstructed.
Drape rear flap over the stroller back and align seam above window with forward canopy supports.
Stretch elastic cords on each side under respective black shock knobs for attachment.
Enlarge or reduce cord loops around shock knobs to adjust tension for a secure fit.
Hook front elastic edge under the plastic nose lip, aligning the front air vent.
Stretch and route the side elastic edges under each respective side of the stroller frame.
Ensure rear flap vents align with air passages between seat back and canopy, keeping openings clear.
Lift and roll shield over the forward edge of the canopy for child loading/unloading.
Release shield, re-secure under stroller nose lip and frame sides after children are safely harnessed.
Hand wash with cold water and hang dry. Do not dry clean, iron, or use a dryer.
One-year warranty against defects; valid for original purchaser with proof of purchase.
General| Brand | BOB |
|---|---|
| Model | Weather Shield |
| Category | Accessories |
| Language | English |
