Unpacking
• Stand the bike box upright. Make sure you have enough
space to work. Put your tools on a table.
• Remove the large staples from the box. Warning – they
are very sharp. Take care.
• Open the top of the box and pull the bike out.
• Place the bike upright on the oor, resting on its rear
wheel and front forks.
• Taking care not to scratch the paintwork, remove all the
packaging and tidy away.
• Turning the forks the right way around (front brake
points forwards). The forks should be curving slightly
forwards. Your bike now looks like this
Box contents
To Next Page
Loading...