Need help?Do you have a question about the Bobbin Gingersnap and is the answer not in the manual?
Insert the handlebar stem into the frame, ensuring correct fork orientation with the brake facing forwards.
Tighten the handlebar stem bolt and adjust the handlebar angle, ensuring all bolts are secure.
Fasten the front mudguard behind the fork using the provided nuts and bolts.
Straighten the mudguard by hand if needed and tighten its attachment bracket securely.
Lower the fork onto the front wheel, ensuring the washer tab fits into the fork and the tyre faces forwards.
Loosely fit nuts and washers, then fasten them securely with the 15mm spanner.
Insert the seat post into the frame, adhering to the minimum insertion mark.
Tighten the seat collar using the allen key and check for secure fit.
Distinguish left/right pedals and screw them into crank arms correctly, then tighten securely.
Attach stabiliser wheel bolts and arms to the bike's axle and frame using specified tools.
Attach the wheel to the leg and securely tighten the nut on reverse using a 12mm spanner and pliers.
Use spanners and barrel adjusters to modify cable tension and sharpen brake response.
Set the chain to the smallest cog and adjust the gear barrel for smooth shifting.
Maintain tyre inflation and schedule professional servicing for optimal bike performance and longevity.
To Next Page
General