Adjusting the brakes
If you need to adjust the brakes, there are 3 ways
to it:
• Use a 10mm spanner to adjust cable tension
(image 1 & 2). Pulling the cable through makes
the brakes sharper.
• Using your ngers, adjust the barrel adjuster
(image 3). Turning anti-clockwise makes the
brakes sharper.
• Using your ngers, adhust the 2
nd
barrel adjuster
at the brake levers. Turning anti-clockwise
makes the brakes sharper. (image 4)
When the brake is applied, the wheel should lock
without you having to squeeze the brake lever too
much.
1.#
2.#
3.# 4.#
To Next Page
Loading...