Bobbin Gingersnap - Nut & Bolt Stabiliser Attachment; Secure Stabiliser Wheel Nut

Attach wheel to stabiliser leg and tighten nut on reverse using 12mm spanner.
Tighten the nut on reverse using a 12mm spanner (1), holding the nut on front (2) with either a 12mm
socket spanner or pliers. Be careful to not strip the nut. Then go back to page 15 for instructions.
1.
2.
Nut & Bolt Attachment Stabilisers ( if you do not have allen key ones)
2.