Bobcat 331 - Instruments and Consoles (Cont’d)

A
P–16627
1
C
P–21183
1
D
P–19202
1
2
Later Models
Early Models
2
P–28620
6 Operation & Maintenance Manual
331/331E/334 Excavator
INSTRUMENTS AND CONSOLES (Cont’d)
20.
Raising And Lowering The Console
Raise the console before exiting the cab.
Pull up on the release handle (Item 1) [A]. The lift spring will
assist in raising the console.
Lower the console before operating the excavator.
Push down on the console [B] until the latch is engaged.
NOTE: When the console is raised, the hydraulic and
traction system functions are locked and will
not operate.
TWO–SPEED TRAVEL
Push the button (Item 1) [C] to engage the High Range.
Press again to disengage.
TAILGATE
Opening And Closing The Tailgate
Later Models: Put your fingers into the opening on the left
edge of the tailgate [D] and pull the latch release to the rear.
Early Models: Move the lever (Item 1) [D] forward to
disengage the tailgate latch.
All Models: Pull the tailgate open to provide access for
service.
Firmly push the tailgate closed to engage the latch.
The tailgate release can be locked (Item 2) [D]. Use the
excavator key to unlock.
B
P–16634