Bobcat 331 - Pre-Starting Procedure (Cont’d)

A
P–16635
331/331E/334 Excavator
Operation & Maintenance Manual
17
PRE–STARTING PROCEDURE (Cont’d)
Fasten the seat belt [A].
Lower the control console [B].
NOTE: There is a control lock switch in the left
console which deactivates the hydraulic
control levers (joysticks) and the traction drive
system when the control console is raised.
The console must be in the locked down
position for the hydraulic control levers
(joysticks) and traction system to operate.
NOTE: If the control lock switch does not deactivate
the control levers and traction system when
console is raised, see your Bobcat dealer for
service.
B
P–16634