TRANSPORTING THE BOBCAT LOADER
Procedure
A
WARNING
Adequately designed ramps
of
sufficient
strength are needed
to
support
the
weight
of
the machine when loading
onto
a
transport
vehicle. Wood ramps can break and cause
personal injury.
W-2058-0494
A loader with an empty bucket or no attachment must be
loaded backward onto the transport vehicle
[A].
The rear of the trailer must be blocked or supported
[A]
when loading or unloading the loader to prevent the front
end of the
trailer from raising up.
Lower the
lift arms and bucket to the transport vehicle.
Stop
the engine. Engage the parking brake.
Install chains as shown
[B]
to prevent the loader from
moving during sudden stops
or
when going up
or
down
slopes.
A
-1-3-
B-07383
741, 742, 743, 743DS Bobcat Loader
Service
Manual
To Next Page