ENGINE
Removal
Open the rear door and clean the engine area.
Disconnect the battery
cables, ground cable first. (See
ELECTRICAL
SYSTEM
Section 6.)
Remove the
coolant from the engine. The radiator cap
must be
loosened to drain coolant.
Connect a hose
to
the valve
or
use a funnel to keep
coolant from getting into the engine compartment. Open
the valve (Item 1)
[A]
and drain coolant into a container.
Turn the
lever (Item 1)
[A]
on the valve. When all the
coolant is removed close the valve.
Close the shutoff valve.
Remove the exhaust pipe from the manifold
[B]
.
Remove the radiator hoses
[C]
.
Remove the
fuel return hose
[0]
.
-7C-8-
741, 742, 743,
7430S
Bobcat Loader
Service Manual
To Next Page