ENGINE (Cont'd)
Installation
Raise the operator cab.
Put the engine in the loader.
Have a second person
in
the pump area. Align the coupler
on
the engine flywheel to the splined shaft on the
hydrostatic motor by turning the engine with the
tool
listed.
MEL
1234 - Crankshaft Nut Socket
NOTE: Belt shield must be removed.
Install the engine mount bolts and tighten to
65-70
ft.-Ibs.
(88-95 Nm) torque.
Install all other parts removed.
A
-7C-11-
741, 742, 743,
7430S
Bobcat Loader
Service Manual
To Next Page