147 S130 Operation & Maintenance Manual
LUBRICATING THE LOADER
Lubrication Locations
Lubricate the loader as specified for the best
performance of the loader. (See SERVICE SCHEDULE
on Page 111.)
Record the operating hours each time you lubricate the
Bobcat loader.
Always use a good quality lithium based multipurpose
grease when you lubricate the loader. Apply lubricant
until extra grease shows.
Lubricate the following locations on the loader:
Figure 219
1. Rod End Lift Cylinder (Both Sides) (2) [Figure 219].
Figure 220
2. Base End Lift Cylinder (Both Sides) (2) [Figure 220].
Figure 221
3. Lift Arm Pivot Pin (Both Sides) (2) [Figure 221].
Figure 222
4. Base End Tilt Cylinder (1) [Figure 222].
To Next Page
Loading...