63 S130 Operation & Maintenance Manual
HYDRAULIC CONTROLS (CONT’D)
Advanced Control System (ACS) In HAND Control
Mode And Advanced Hand Controls (AHC)
Figure 53
Lift Arm Operation - (Left Hand Lever)
Move the lever outward (Item 1) [Figure 53] to raise
the lift arms.
Move the lever inward (Item 2) [Figure 53] to lower
the lift arms.
Lift Arm Float Position - (Left Hand Lever)
Press and hold the Float button (Item 3) while the
lever is in neutral. Move the lever to lift arm down
position (Item 2) [Figure 53], then release the button.
Press Float button (Item 3) [Figure 53] again or move
the lever to lift arm up position to disengage.
Use the float position of the lift arms to level loose
material while driving backward.
Figure 54
Tilt Operation - (Right Hand Lever)
Move the lever inward (Item 1) [Figure 54] to tilt the
bucket backward.
Move the lever outward (Item 2) [Figure 54] to tilt the
bucket forward.
Selectable Joystick Controls (SJC) In ‘ISO’ Control
Pattern
Figure 55
Lift Arm Operation - (Right Hand Joystick)
Move the joystick backward (Item 1) [Figure 55] to
raise the lift arms.
Move the joystick forward (Item 2) [Figure 55] to
lower the lift arms.
Lift Arm Float Position - (Right Hand Joystick)
Press and hold the Float button (Item 3) while the
joystick is in neutral. Move the joystick to lift arm down
position (Item 2) [Figure 55], then release the button.
Press Float button (Item 3) again or move the joystick
to lift arm up position (Item 1) [Figure 55] to
disengage.
Use the float position of the lift arms to level loose
material while driving backward.
Figure 56
Tilt Operation - (Right Hand Joystick)
Move the joystick inward (Item 1) [Figure 56] to tilt the
bucket backward.
Move the joystick outward (Item 2) [Figure 56] to tilt
the bucket forward.
To Next Page
Loading...