S250 Bobcat Loader
VIII Operation & Maintenance Manual
FEATURES, ACCESSORIES AND ATTACHMENTS
Standard Items
Model S250 Bobcat loaders are equipped with the
following standard items:
• Automatically activated air intake heater
• Bobcat Interlock Control System (BICS)
• Bob-Tach™ frame
• CE certification
• Counterweights: four axle weight sets and two tailgate
plate weights
• Deluxe operator cab*
Includes interior cab foam, side, top and rear
windows, accessory wire harness, dome light, and
electrical power port
• Electrically activated proportional front auxiliary
hydraulics
• Engine/hydraulics system shutdown
• High-back cushion suspension seat
• Hydraulic bucket positioning (including ON/OFF
switch)
• Instrumentation
• Lift arm support
• Operating lights, front and rear
• Parking brake
• Seat bar
• Seat belt
• Turbo-charger with approved spark arrestor
• Tyres – 12-16.5 – 12-ply – Bobcat heavy duty
• Warranty: 12 months or 2000 hours
* Roll Over Protective Structure (ROPS) – meets
requirements of SAE-J1040 and ISO 3471
Options and Accessories
Below is a list of some equipment available from your
Bobcat Loader dealer as Dealer and/or Factory Installed
Accessories and Factory Installed Options. See your
Bobcat dealer for other available options, accessories
and attachments.
• Dealer Installed Options
• 7 and 14-pin electrical attachment control kit
(7-pin kit standard with S250H)
• Air conditioning kit
• Back up alarm kit
• Bob-Tach™ frame
• Cab enclosure kit
• Catalytic purifier kit
• Door switch sensor kit
• FOPS kit**
• Four-point lift kit
• Fresh air heater kit
• Front door kit
• Lift arm spacer – 1-inch
• Operator cab, CE, enclosure kit
• Plumbing kit for fresh air heater
• Rear auxiliary hydraulic kit
• Secondary auxiliary hydraulics kit
• Special applications kit
• Urethane track package to fit 12-16.5 tyres
• Wheel spacer kit for steel tracks – 1.5-inch
• Factory Options
• Advanced Control System (ACS)
• Advanced Hand Controls (AHC)
• Cab enclosure with heat
• Deluxe instrument panel
• Heavy duty tyres with offset rims – 12-16.5 –
12-ply
• Power Bob-Tach™
• Segmented tyres – 12-16.5
• Segmented tyres – industrial type – 8.25-15
• Selectable Joystick Controls (SJC)
• Severe duty foam-filled tyres – 12-16.5 – 12-ply
• Severe duty tyres – 12-16.5 – 12-ply
• Steel track package to fit 12-16.5 tyres
• Super float tyres – 31 x 15.5-15 – 12-ply
• Two-speed travel
** Falling Objects Protective Structure (FOPS) –
meets requirements of SAE-J1043 and ISO 3449,
Level I
Specifications subject to change without notice.
To Next Page
Loading...