S250 Bobcat Loader
OI-39 Operation & Maintenance Manual
OPERATING PROCEDURE
Operating With A Full Bucket
When operating on a public road or highway, always
follow local regulations.
For example: Slow Moving Vehicle Sign or direction
signals may be required.
Always warm the engine and hydrostatic system before
operating the loader.
IMPORTANT
Machines warmed up with moderate engine speed
and light load have longer life.
I-2015-0284
Operate the loader with engine at full speed for maximum
horsepower. Move the steering levers only a small
amount to operate the loader slowly.
New operators must operate the loader in an open area
without bystanders. Operate the controls until the loader
can be handled at an efficient and safe rate for all
conditions of the work area.
Figure OI-74
Figure OI-75
With a full bucket, go up or down the slope with the heavy
end toward the top of the slope [Figure OI-74] and
[Figure OI-75].
B-16266
WITH BUCKET FULL
Going Up Slope
B-16262
WITH BUCKET FULL
Going Down Slope
To Next Page
Loading...