AVOID SERIOUS INJURY OR DEATH
• Engines can have hot parts and hot exhaust gas.
Keep flammable material away.
• Do not use machines in atmosphere containing
explosive dust or gases.
W-2051-0212
Perform the PRE-STARTING PROCEDURE. (See PRE-
STARTING PROCEDURE on Page 94.)
Figure 108
Set the engine speed control to the low idle position
[Figure 108].
NOTE: Loaders with a Keyless Start Panel have a
permanent, randomly generated Master
Password set at the factory. Your loader will
also have an Owner Password. The owner
password can be changed to prevent
unauthorised use of your loader. (See
Changing The Owner Password on Page 211.)
Keep your password in a safe location for
future needs.
NOTE: The Password Lockout feature can be used to
allow starting of the loader without a
password. (See Password Lockout Feature on
Page 211.)
Figure 109
Turn the key switch to RUN (Item 2) [Figure 109]. The
indicator lights on the left instrument panel will come ON
briefly and the instrument panel / monitoring system will
perform a self test.
Use the numeric keypad (Item 1) [Figure 109] to enter
the password.
Figure 110
The machine will cycle the glow plugs automatically
based on temperature. The engine preheat icon (Item 1)
and the cycle time remaining (Item 2) [Figure 110] are
displayed in the data display.
When the engine preheat icon goes OFF, turn the key
switch to START (Item 3). Release the switch when the
engine starts and allow the switch to return to the RUN
position (Item 2) [Figure 109].
To Next Page
Loading...