149 S450 Operation & Maintenance Manual
REAR DOOR (TAILGATE)
Opening And Closing
Figure 191
Reach into the slot on the right side of the rear door and
pull the latch handle (Item 1) [Figure 191]. Pull the rear
door open.
The rear door is equipped with a door stop feature on the
top hinge.
Figure 192
Move the door stop into the engaged position (Item 1) to
hold the door open. Move the door stop up (Item 2)
[Figure 192] to allow the door to close.
Keep the rear door closed when operating the
machine. Failure to do so could seriously injure a
bystander.
W-2020-1285
Close the rear door.
Adjusting Latch
Figure 193
The door latch striker (Item 1) [Figure 193] can be
adjusted up or down for alignment with the door latch.
Close the rear door before operating the loader.
To Next Page
Loading...