221 S450 Operation & Maintenance Manual
(S450) LOADER SPECIFICATIONS (CONT’D)
Electrical System
Capacities
Alternator Belt driven, 90 amperes, open frame
Battery
12 volt, 600 cold cranking amperes @ -18°C (0°F),
115 minute reserve capacity @ 25 amperes
Starter 12 volt, gear type, 2,7 kW (3.62 hp)
Instrumentation
Gauges:
Engine Coolant Temperature and Fuel Level
Warning lights:
Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction,
Hydraulic System Malfunction, Diesel Particulate Filter (DPF) / Diesel Exhaust
Fluid (DEF), and General Warning
Indicators:
BICS™ Functions, Two-Speed, 3-Point Restraint, and Turn Signals
Data Display:
Operating Hours, Engine rpm, Speed Management Setting, Maintenance Clock
Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown, Lift
and Tilt Compensation Setting, Steering Drift Compensation Setting, and Drive
Response Setting
Other:
Audible Alarm, Lights, and Option / Accessory Switches
Optional Deluxe Instrumentation Panel:
*Additional displays for: Engine rpm, Engine Coolant Temperature, Engine Oil
Pressure, System Voltage, Hydraulic Fluid Temperature, and Hydrostatic Charge
Pressure
*Additional Features Included: Keyless Start, Digital Clock, Job Clock, Password
Lockout, Multiple-Language Display, Help Screens, Diagnostic Capability, and
Engine / Hydraulic Systems Shutdown Function
Fuel 54,5 L (14.4 U.S. gal)
Engine Oil with Filter Change 8,7 L (9.2 qt)
Engine Cooling System with Heater 10,6 L (2.8 U.S. gal)
Engine Cooling System without
Heater
9,5 L (2.5 U.S. gal)
Hydraulic / Hydrostatic Reservoir 5,3 L (1.4 U.S. gal)
Hydraulic / Hydrostatic System 21,0 L (5.5 U.S. gal)
Chaincase Reservoir 21,0 L (5.5 U.S. gal)
Air Conditioning Refrigerant (R-134a) 0,68 kg (1.5 lb)
To Next Page
Loading...