222 S450 Operation & Maintenance Manual
(S450) LOADER SPECIFICATIONS (CONT’D)
Tyres
Fuel Consumption
Environmental
Temperature Range
Heavy Duty (Standard) 10.00 – 16.5, 10 Ply Rating
Heavy Duty Poly Fill (Option) 10.00 – 16.5, 10 Ply Rating
Severe Duty (Option) 10.00 – 16.5, 10 Ply Rating
Severe Duty Poly Fill (Option) 10.00 – 16.5, 10 Ply Rating
Solidflex (Option) 31 x 6 x 10
Standard Duty (Option) 10.00 – 16.5, 8 Ply Rating
Recommended Pressure
Inflate tyres to MAXIMUM pressure shown on the sidewall of the tyre; DO NOT
mix brands of tyres used on the same loader
Engine Load Full - 100% High - 70% Medium - 50% Low - 30%
Fuel Consumption Rate Per Hour
10,6 L
(2.8 U.S. gal)
8,7 L
(2.3 U.S. gal)
7,6 L
(2.0 U.S. gal)
7,2 L
(1.9 U.S. gal)
NOTE: The engine fuel consumption chart is to be used as a guideline only. The actual results may vary.
DECLARED SINGLE-NUMBER NOISE EMISSION VALUES
In accordance with ISO 4871
Noise level per Directive 2000/14/EC — L
wA
101 dB
Operator noise level per Directive 2006/42/EC — L
pA
87 dB
DECLARED VIBRATION EMISSION VALUES
In accordance with EN 12096
Value Uncertainty
Whole-body vibration per ISO 2631-1
1,29 m/s
2
0,52 m/s
2
Hand-arm vibration per ISO 5349-1
1,73 m/s
2
- - -
Operation and storage -26 – +43°C (-15 – +110°F)
To Next Page
Loading...