79 S450 Operation & Maintenance Manual
STEERING DRIFT COMPENSATION
Steering Drift Compensation is available on SJC equipped machines.
Description
Steering Drift Compensation can be used to reduce
steering drift to maintain a desired travel path in forward
and reverse directions.
Examples of applications where this feature can be used:
• To compensate for normal variations such as tyre
inflation pressure, track tension, tyre wear, and track
wear.
• Using side shift attachments such as trenchers,
planers, and silt fence installers.
• Driving on uneven terrain such as crowned road
surfaces.
Figure 69
Steering drift compensation contains a total of 21
settings. Steering drift compensation can be set to any
point from neutral to [SFL10] or [SRL10] left, and from
neutral to [SFR10] or [SRR10] right. [SF---] or [SR---] is
displayed when set for neutral [Figure 69].
Operation
Perform PRE-STARTING PROCEDURE and STARTING
THE ENGINE procedures:
1. Fasten seat belt.
2. Lower seat bar.
3. Put joysticks in neutral position.
4. Start the engine.
5. Press the PRESS TO OPERATE LOADER button.
6. Current drive response setting is displayed briefly in
the data display.
To Next Page
Loading...