Bobcat S650 - Page 196

194 S650 Operation & Maintenance Manual
CONTROL PANEL SETUP (CONT’D)
Right Panel Setup (Deluxe Instrumentation Panel)
(Cont’d)
More Examples
Clocks
Select …
DISPLAY screen icon
[1. CLOCKS]
SET TIME AND DATE
Select [1. TIME]
Use the keypad to enter date.
Press ENTER to continue.
Use the keypad to enter time.
Select AM / PM / 24hr.
Press ENTER to continue.
RESET JOB CLOCK
(Owner password required if Job Clock is locked.)
Select [2. JOB CLOCK]
Press [4] to cycle between lock and unlock.
Press [9] to reset.
SET ALARM
Select [3. ALARM CLOCK]
Select alarm 1, 2 or 3.
Press [1] to cycle between ON and OFF.
Press [2] and use the keypad to enter alarm time.
Select AM / PM / 24hr.
Press ENTER to continue.
Press [3] to cycle between ONCE, DAILY and
WEEKLY.
Selecting WEEKLY will prompt for a day selection
using number [4].
Press ENTER to continue.
Vitals
(Monitor the engine, hydraulic / hydrostatic,
electrical functions when engine is running.)
Select …
VITALS screen icon
Press [6] to cycle between METRIC or ENGLISH (M /
E) readouts.
You can monitor real-time readouts of:
Engine Speed
Engine Oil Pressure
Engine Coolant Temperature
System Voltage
Hydraulic Charge Pressure
Hydraulic Oil Temperature
The Deluxe Instrumentation Panel is easy to use.
Continue to set your own preferences for running /
monitoring your Bobcat loader.