Bobcat S650 - OPERATOR SAFETY WARNINGS; SAFETY EQUIPMENT

1
OPERATOR SAFETY WARNINGS
NA1698
WRONG
Always use the seat bar and fasten
seat belt snugly.
Always keep feet on the foot pedals
or footrests when operating loader.
WARNING
Operator must have instructions
before operating the machine.
Untrained operators can cause
injury or death.
W-2001-0502
Do not use loader in atmosphere
with explosive dust, explosive gas,
or where exhaust can contact
flammable material.
Never exceed Rated Operating
Capacity.
Never leave loader with engine
running or with lift arms up.
To park, engage parking brake and
put attachment flat on the ground.
Always carry bucket or
attachments as low as possible.
Do not travel or turn with lift arms
up.
Load, unload, and turn on flat level
ground.
Never modify equipment.
Use only attachments approved by
Bobcat Company for this model
loader.
Safety Alert Symbol: This symbol with a warning statement,
means: “Warning, be alert! Your safety
is involved!” Carefully read the message
that follows.
Never use loader without operator
cab with ROPS and FOPS approval.
Fasten your seat belt.
OSW68-0609
NA1676A
WRONG
NA1672
WRONG
NA1677
WRONG
WRONG
NA1675
NA1671
WRONG
CORRECT
NA1254
CORRECT
NA1673
NA1696
WRONG
CORRECT
P-90216
Never carry riders.
Keep bystanders away from work
area.
Never use loader as man lift or
elevating device for personnel.
The Bobcat Loader must be equipped with safety items necessary for each job. Ask your dealer for information on the safe
use of attachments and accessories.
SAFETY EQUIPMENT
1. SEAT BELT: Check belt fasteners and check for damaged webbing or buckle.
2. SEAT BAR: When up, it must lock the loader controls.
3. OPERATOR CAB (ROPS and FOPS): It must be on the loader with all fasteners tight.
4. OPERATOR’S HANDBOOK: Must be in the cab.
5. SAFETY SIGNS (DECALS): Replace if damaged.
6. SAFETY TREADS: Replace if damaged.
7. GRAB HANDLES: Replace if damaged.
8. LIFT ARM SUPPORT DEVICE: Replace if damaged.
9. PARKING BRAKE
10. BOBCAT INTERLOCK CONTROL SYSTEM (BICS)
Never use the loader without
instructions. See machine signs
(decals), Operation & Maintenance
Manual, and Operator’s Handbook.